# Circuit Globe All about Electrical and Electronics

## Newton Raphson Method

Newton Raphson Method is an iterative technique for solving a set of various nonlinear equations with an equal number of unknowns. There are two methods of solutions for the load flow using Newton Raphson Method. The first method uses rectangular coordinates for the variables while the second method uses the polar coordinate form. Out of…

## Iterative Method

The Iterative Method is a mathematical way of solving a problem which generates a sequence of approximations. This method is applicable for both linear and nonlinear problems with large number of variables. The word Iterative or Iteration refers to the technique that solve any linear system problems with successive approximation at each step. There are…

## Gauss Seidel Method

Gauss-Seidel Method is used to solve the linear system Equations. This method is named after the German Scientist Carl Friedrich Gauss and Philipp Ludwig Siedel. It is a method of iteration for solving n linear equation with the unknown variables. This method is very simple and uses in digital computers for computing. The Gauss-Seidel method…

The flow of electrical power in any interconnected electrical system is termed as Load Flow. The Load Flow Study is conducted to calculate the voltages at the various buses. It is also used for the study of the short-circuit conditions or any interconnected power system. The load flow study is essential for the operation of the power system under an…

## Difference Between Capacitor and Battery

The Difference Between Capacitor and Battery is explained considering factors like function of capacitor and battery, type of component they are, their usage, voltage, charging and discharging time, life cycle, cell voltage, cost, service life, charging temperature, specific power, potential difference, polarity, types and size. Difference Between Capacitor and Battery is shown below in the…

## Difference Between Isolator and Circuit Breaker

The major difference between the isolator and the circuit breaker is that the isolator disconnects the circuit at offload condition whereas the circuit breaker disconnects the circuit at on load condition. The Difference Between Isolator and Circuit Breaker are explained in the comparison chart by considering the factors like the type of device and its action. The…

## Difference Between Capacitor and Inductor

The Difference Between Capacitor and Inductor are explained considering various factors like the basic definition, calculation of stored energy, the flow of current, their behavior in both AC and DC circuits. Relationship between voltage and current, its unit, types of inductor and capacitor, their resistance to change and applications. The Difference Between Capacitor and Inductor…

## Difference between Generator and Inverter

The Difference Between Generator and Inverter are discussed here on the basis of various factors like voltage, their time period of starting, noise and pollution, source of power, starting, capacities, their installation, duration of the power outage, backup power supply, fuel storage, maintenance, size and weight of the machine, space requirement, maximum power output, parallel…

## Difference Between Relay and Circuit Breaker

The difference between the Relay and Circuit breaker is explained on the various factors like the principle of their operation, working of relay and circuit breaker, type of device they are, voltage, their usability and whether it works as an amplifier or not. The Difference Between Relay and Circuit Breaker are given below in the…

## Difference Between Transmission and Distribution Line

The Transmission line and Distribution line both are used to carry power or electricity from one place to the other. The difference between transmission and distribution line are explained on the basis of the factors like the basic usage of the transmission and distribution line, their working supply phase, voltage level and level of conduction.…