Metadyne

Metadyne is a special machine which consists of two pairs of brushes or has an additional set of brushes on the d axis. This arrangement enables the armature MMF to provide most of the excitation and achieve higher power gains. In this, the brushes of the quadrature axis (q axis) are short-circuited, and direct axis …

Metadyne Read More »

Hybrid Stepper Motor

The word Hybrid means combination or mixture. The Hybrid Stepper Motor is a combination of the features of the Variable Reluctance Stepper Motor and Permanent Magnet Stepper Motor. In the center of the rotor, an axial permanent magnet is provided. It is magnetized to produce a pair of poles as North (N) and South (S) …

Hybrid Stepper Motor Read More »

Permanent Magnet Stepper Motor

The Permanent Magnet Stepper Motor has a stator construction similar to that of the single stack variable reluctance motor. The rotor consists of permanent magnet poles of high retentivity steel and is cylindrical in shape. The concentrating windings on diametrically opposite poles are connected in series to form a two phase winding on the stator. …

Permanent Magnet Stepper Motor Read More »

Linear Induction Motor

A Linear Induction Motor (LIM) is an advanced version of rotary induction motor which gives a linear translational motion instead of the rotational motion. The stator is cut axially and spread out flat. In this type of motor, the stator and rotor are called primary and secondary respectively. The secondary of the linear induction motor …

Linear Induction Motor Read More »

Two Phase AC Servo Motor

As we have already seen servo motor in the previous article. Here we will discuss the Two-Phase and Three Phase AC Servo motor. The stator of the Two-Phase AC Servo Motor has the two distributed windings which are displaced from each other by 90 degrees electrical. One winding is known as a Reference or Fixed …

Two Phase AC Servo Motor Read More »

Printed Circuit Board (PCB) Motor

A Printed Circuit Board or a Disc Armature motor consists of a rotor disc made of non-magnetic and non-conducting material. The armature winding and the commutator are printed with copper on both sides of the disc. The disc armature is placed between two sets of permanent magnets mounted on the ferromagnetic plates. Brushes are placed …

Printed Circuit Board (PCB) Motor Read More »