Types of DC Generator – Separately Excited and Self Excited

The DC generator converts mechanical power into electrical power. The magnetic flux in a DC machine is produced by the field coils carry current. The circulating current in the field windings produces a magnetic flux, and the phenomenon is known as Excitation.

DC Generator is classified according to the methods of their field excitation.

By excitation, the DC Generators are classified as Separately excited DC Generators and Self-excited DC Generators. There is also Permanent magnet type DC generators.

The self-excited DC Generators are further classified as Shunt wound DC generators; Series wound DC generators and Compound wound DC generators.

The Compound Wound DC generators are further divided as long shunt-wound DC generators, and short shunt-wound DC generators.

The field pole of the DC generator is stationary, and the armature conductor rotates. The voltage generated in the armature conductor is of alternating nature, and this voltage is converted into the direct voltage at the brushes with the help of the commutator.

Contents:

The detailed description of the various types of generators is explained below.

Permanent Magnet type DC Generator

In this type of DC generator, there is no field winding is placed around the poles. The field produced by the poles of these machines remains constant. Although these machines are very compact but are used only in small sizes like dynamos in motorcycles, etc.

The main disadvantage of these machines is that the flux produced by the magnets deteriorates with the passage of time which changes the characteristics of the machine.

Separately Excited DC Generator

A DC generator whose field winding or coil is energised by a separate or external DC source is called a separately excited DC Generator. The flux produced by the poles depends upon the field current with the unsaturated region of magnetic material of the poles. i.e. flux is directly proportional to the field current. But in the saturated region, the flux remains constant.

The figure of self-excited DC Generator is shown below:

types-of-dc-generator-fig-1
Separately Excited DC Generator

Here,

Ia = IL where Ia is the armature current and IL is the line current.

Terminal voltage is given as:

types-of-DC-generator-eq1-compressor

If the contact brush drop is known, then the equation (1) is written as:

types-of-DC-generator-eq2

The power developed is given by the equation shown below:

types-of-DC-generator-eq3-

Power output is given by equation (4) shown above.

Self Excited DC Generator

Self-excited DC Generator is a device, in which the current to the field winding is supplied by the generator itself. In self-excited DC generator, the field coils may be connected in parallel with the armature in the series, or it may be connected partly in series and partly in parallel with the armature windings.

The self-excited DC Generator is further classified as

Shunt Wound Generator

In a shunt-wound generator, the field winding is connected across the armature winding forming a parallel or shunt circuit. Therefore, the full terminal voltage is applied across it. A very small field current Ish, flows through it because this winding has many turns of fine wire having very high resistance Rsh of the order of 100 ohms.

The connection diagram of shunt-wound generator is shown below:

types-of-dc-generator-fig-2
Shunt Wound DC Generator

The shunt field current is given as:

types-of-DC-generator-eq4

Where Rsh is the shunt field winding resistance.

The current field Ish is practically constant at all loads. Therefore, the DC shunt machine is considered to be a constant flux machine.

Armature current is given as:

types-of-DC-generator-eq5

Terminal voltage is given by the equation shown below:

types-of-DC-generator-eq6

If the brush contact drop is included, the equation of the terminal voltage becomes

types-of-DC-generator-eq7

Series Wound Generator

A series-wound generator the field coils are connected in series with the armature winding. The series field winding carries the armature current.

The series field winding consists of a few turns of wire of thick wire of larger cross-sectional area and having low resistance usually of the order of less than 1 ohm because the armature current has a very large value.

Its convectional diagram is shown below:

types-of-dc-generator-fig-3
Series Wound DC Generator

Series field current is given as:

types-of-DC-generator-eq8

Rse is known as the series field winding resistance.

Terminal voltage is given as:

types-of-DC-generator-eq9

If the brush contact drop is included, the terminal voltage equation is written as:

types-of-DC-generator-eq10-

The flux developed by the series field winding is directly proportional to the current flowing through it. But it is only true before magnetic saturation after the saturation flux becomes constant even if the current flowing through it is increased.

Compound Wound Generator

In a compound-wound generator, there are two field windings. One is connected in series, and another is connected in parallel with the armature windings. There are two types of compound-wound generator.

      • Long shunt compound-wound generator
      • Short shunt compound-wound generator

For a detailed study of the compound-wound generator, refer the topic Compound Wound Generator.

Also See: Compound Wound Generator

16 thoughts on “Types of DC Generator – Separately Excited and Self Excited”

Leave a Comment

Your email address will not be published. Required fields are marked *